Solution Description
WP worm gearbox is a new era solution designed by our manufacturing facility on the basis of improving WJ collection merchandise and combining advanced systems at property and abroad. The appearance adopts sophisticated sq. box composition. Its shell is produced of higher top quality solid iron. Small quantity, mild bodyweight, higher radiation effectiveness, substantial output torque, smooth procedure, minimal sounds. It satisfies all positions.
The items are broadly utilized in the creating equipments of all types of industries inside of and exterior China. They are the best selections for these days CZPT services of mechanical reducing travel management to recognize huge twisting distance, massive gear ratio, minor sounds, high efficiency and stability.
1. Functions:
1) Substantial good quality aluminum alloy Motovario like equipment box, light-weight excess weight and non-rusting
2) Large output torque, secure transmission with reduced sounds
3) Large heat-radiating deficiency, sophisticated shape, sturdy support life and tiny dimensions
4) Suited for omni-bearing set up
two. Positive aspects:
one) Clean in managing and small in volume
two) High in radiating efficiency
three) Resilient in service life
four) Perform lengthy time in dreadful condition
five) Totally sealed and non-rusting
three. Set up
one)The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
2)The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
three)The diameter tolerance zone of input and output shaft is H6, the holes of fitness(such as couplings, belt-pulley, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
four)Drivers such as sprocket wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
5)While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
six)When ordering or using all kinds of WPD type, if the motor weight is binger than the common, supporting set is required.
four. Use
Before using,please check carefully whether the reducer model, distance, ratio, input connecting method,
output shaft structure, input and output shaft direction and revolving direction accord with required.
Technological info:
Torque: 2N.m-3571N.m
Input speed: 1000r/min, 1500r/min
Output velocity: .30-419r/min
Power: .04KW-15KW
WP reducer, divided into common WPS sequence, normal WPD sequence, standard WPA, WPO,WPDA,WPDO,WPDS,WPDS and so on. WP worm gear and worm reducer is developed on the basis of WD reducer, the worm is created of 45 # large top quality metal right after heat treatment method processing and manufacturing, worm gear with tin bronze cast, use-resisting efficiency is very good, specifically on the bearing capability is much more clear, worm gear and worm reducer is mostly utilised in plastics, metallurgy, beverage, mining, lifting transportation, chemical reduction drive building and other mechanical tools.
Advantages
1.Easy transmission, vibration, effect and sounds are little, velocity reduction ratio, vast flexibility, can be employed with a variety of mechanical equipment.
two.Can be a one degree of transmission to get a greater transmission ratio, compact construction, most models of reducer has a good self-locking, braking demands of mechanical gear can preserve the braking device
3.worm tooth tooth meshing friction decline is massive, so the transmission performance is decrease than the equipment, simple to warmth and higher temperature.
4.Higher demands for lubrication and cooling.
five.Great mutual compatibility, worm equipment and worm are made according to nationwide expectations, bearings, oil seals and other common areas.
6.The box entire body type contains standard kind (the box entire body is vertical or horizontal sort with foot board) and common kind (the box entire body is cuboid, with fixed screw holes on a number of sides, CZPT foot board or another foot board, and so forth.).
7. There are 2 relationship modes of input shaft: standard kind (single input shaft and double input shaft) and motor flange.
eight. The place path of the output and input axes is below and above the input axes Output shaft up and down Enter axis up and down.
nine. Two or 3 reducer sets can be utilized to kind a multistage reducer to get a maximum transmission ratio.
Model: | WP40,fifty,60,70,80,a hundred,120,one hundred thirty five,one hundred fifty five,one hundred seventy five,200,250 |
Ratio: | one:ten,15,20,twenty five,thirty,40,fifty,60 |
Color: | Inexperienced Or Customer Request |
Noise: | reduced noise (<50DB) |
Advantage: | Productive and protected working |
Material: |
Housing:Cast iron and Copper alloy |
Worm Equipment-Bronze 9-4# | |
Worm with carburizing and quenching, floor harness is fifty six-62HRC | |
Shaft-chromium metal-forty five# | |
Packing: | Carton and Wood Scenario |
Bearing: | C&U Bearing |
Certificate: | ISO9001,CE,3C,OEM |
Guarantee: | 12 months |
Enter Power: | .06kw, .09kw, .12kw, .18kw, .25kw, .37kw, .55kw, .75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw |
Usages: | Industrial Machine: Food Things, Ceramics,CHEMICAL,Packing,Dyeing, Woodworking,Glass. |
IEC Flange: | 56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5 |
Lubricant: | Artificial & Mineral |
Underneath is a list of our presently offered industrial gearboxes. If you can not discover what you are looking for, please speak to the manufacturing unit for far more possibilities. At EP, we are constantly creating new items and retrofitting previous ones to satisfy consumer requirements.
These compact, light-weight, minimal backlash inline gear reducers ended up originally designed for encoder programs. They are also ideal for several other generate systems. Encoder gear reducers have a quite low minute of inertia at the shaft enter and are rated for input speeds up to 3000 rpm. Two body sizes are accessible with gear ratios from 4.96:1 to 3600:1. Our encoder gearbox sync pads are obtainable from stock.