Tag Archives: oem gearbox

China OEM Replacement Gft17b2-B45/Z14 CZPT Planetary Gearbox bevel gearbox

Product Description

Product Description

GFT series planetary gearbox  adopts two-stage and three-stage planetary gear structure design, built-in multi-disc parking brake, compact structure, full complement planetary gear bearings and high load-bearing capacity bearings can absorb the impact force from the load, easy to install and applicable For driving devices such as engineering machinery, construction machinery, and mining machinery. A full range of gearboxes with multiple planetary stages, as well as planetary gearboxes that can be combined with numerous CHINAMFG hydraulic motors (and in some cases electric motors). GFT series planetary gearboxes are used in many industries around the world, including agriculture, construction and mining.

 

 

Product Parameters

Model Output
torque
Speed ratio Holding  torque Recommend motor   Weight
GFW5190F 105000 121.1 1448 A6VM200/
A2FE(107/125)
A6VE(160/170) 430
GFT8190F 130000 68/209 A2FE(125/160) 450
GFT220 200000 97.7/145.4/188.9/246.1 1472 A2FE(160/180) A6VM(200/215) 880
GFT160 140000 114.2/133 1448 A2FE(160/180) A6VE160/
A6VM(200/215
680
160000 251
GFT110 95000 95.8/114.8/128.6/147.2/215 1232 A2FE
(107/125/160)/
A6VM160
A6VE107/160 420
110000 147.2/173.9/215
GFT80 68000 76.7/99/126.9/149.9/185.4 1232 A2FE
(107/125/160)
A6VE107/160 380
80000
GFT60 42500 86.5 818 A2FE80/90/ 107/125 A6VE80/107 250
60000 105.5/139.9/169.9
GFT50 50000 99.8 715 A2FE80/90 A6VE80 245
GFT36 26000 67/79.4/100/116.5 715 A2FE80/90 A6VE80 170
36000 67/79.4/100/116.5/131/138.8
GFT17 12500 45.4 379 A2FE45/56/63 A6VE28/55 99
17000 32.1/45.4/54 90

Dimensions

 

Related Product

 

Packaging & Shipping

Company Profile

Application

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery
Hardness: Soft Tooth Surface
Installation: Vertical Type
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gearbox

Can I Use Synthetic Oil in My Gearbox?

Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:

  • Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
  • Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
  • Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
  • Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
  • Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
  • Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
  • Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.

However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.

China OEM Replacement Gft17b2-B45/Z14 CZPT Planetary Gearbox   bevel gearbox	China OEM Replacement Gft17b2-B45/Z14 CZPT Planetary Gearbox   bevel gearbox
editor by CX 2024-05-15

China OEM Custom Precision Iron Casting for Gearbox Housing synchromesh gearbox

Product Description

General Products      
 Application/Service Area
 
Metal Parts Solution for Vehicle, Agriculture machine, Construction Machine, transportation equipment, Valve and Pump system, Agriculture machine metal Parts, engine bracket, truck chassis bracket, gear box , gear housing , gear cover, shaft, spline shaft , pulley, flange, connection pipe, pipe, hydraulic valve , valve housing ,Fitting , flange, wheel, fly wheel, oil pump housing, starter housing, coolant pump housing, transmission shaft , transmission gear, sprocket, chains etc.
 
 Main blank Process for Casting  
Sand Casting , Resin Sand Casting, Green Sand Casting, Shell Molding, Automatic Molding, Lost Wax Casting, Lost Foam Molding Casting
 
 Blanks Tolerance -Casting  Tolerance CT9-10 for  Machine Molding Process,
CT8-9 for Shell Molding and Lost Foam Molding Casting Process
CT10-11 for Manual Molding Sand  casting Process
 Applicable Material  
See Table Below (Ductile Iron Casting, Grey Iron Casting)
OR According to customer requirement
 
 Casting Blank Size  /Dimensions 2 mm-2000mm / 0.08inch-79inch  for casting iron, according to customer requirement
 Casting Blank Weight Range from 0.01kg-1000kg for casting iron
 Applicable Machining Process  
CNC Machining/ Lathing/ Milling/ Turning/ Boring/ Drilling/ Tapping/ Broaching/Reaming /Grinding/Honing and  etc.
 
 Machining Tolerance From 0.005mm-0.01mm-0.1mm
 Machined Surface Quality Ra 0.8-Ra3.2, according to customer requirement
 Applicable Heat Treatment  
Normalization , annealing, quenching and tempering, Case Hardening, Nitriding, Carbon Nitriding, Induction Quenching
 
 Applicable Finish Surface  Treatment  
Shot/sand blast, polishing, Surface passivation, Primer Painting , Powder coating, ED- Coating, Chromate Plating, zinc-plate, Dacromat coating, Finish Painting.
 
 MOQ For iron casting : 100pcs
For Machining : 50pcs
 Lead Time 45days from the receipt date of deposit for iron casting

 
Ductile Iron Casting Material Comparison Table:

Cast iron with nomular graphite
DIN EN 1563
Germany
DIN 1693
France
NF
Great Britain
BS
Netherlands
NEN
Sweden
MNC
USA
ASTM A536
EN-GJS-350-22-LT GGG-35.3 FGS 370-17 370/17 GN 38 0571 -15 —-
EN-GJS-400-18-LT GGG-40.3     —- —- —- —- 60-40-18
EN-GJS-400-15 GGG-40 FGS-400-12 420/12 GN 42 0571 -02 60-40-18
EN-GJS-400-10 —- —- 420/12 —- —- 65-45-12
EN-GJS-500-7 GGG-50 FGS-500-7 500/7 GN 50 0727-02 65-45-12/
80-55-06
EN-GJS-600-3 GGG-60 FGS-600-3 600/3 GN 60 571-03 80-55-06
EN-GJS-700-2 GGG-70 FGS-700-2 700/2 GN 70 571-01 100-70-03
EN-GJS-800-2 GGG-80 FGS-800-2 800/2     120-90-02
EN-GJS-1000-5 (DIN EN 1564) GGG-100B/A —- —- —- —- 850-550-10
EN-GJS-AX NiSiCr35 5 2 GGG-
NiSiCr 35 5 2
FGS-
Ni35Si5Cr2
S5S —- —- Type D-5S

 
Grey Iron Casting Material Comparison Table:

Cast iron with lamellar graphite
DIN EN 1561
Germany
DIN 1691
France
NF
Great Britain
BS
Netherlands
NEN
Sweden
MNC
USA
ASTM A48
EN-GJL-150 GG-15 Ft 15 D Grade 150 GG 15 01 15-00 20 B / 25 B
EN-GJL-200 GG-20 Ft 20 D Grade 180/220 GG 20 01 20-00 25 B / 30 B
EN-GJL-250 GG-25 Ft 25 D Grade 220/260 GG 25 01 25-00 35 B / 40 B
EN-GJL-300 GG 30 Ft 30 D Grade 300 GG 30 01 30-00 40B / 45 B

 
 

Our Package :

Packing & Delivery  (Show As Above):
Inner Packing →Strong & waterproof plastic big is packed inside, to keep the product in safe condition.
Or as customer requests.

Outer Packing →Multilayer wooden box with strong bandages, used for standard export package.
Or customized as per customer’s requirements.

Our Company

                       ZheJiang CHINAMFG Machinery Manufacture Co., Ltd.
                                                                                                   –Branch of CHINAMFG Industry Ltd. 

We specialize in Metal Parts Solution for Vehicle, Agriculture machine, Construction Machine, transportation equipment, Valve and Pump system etc. 

With keeping manufacturing process design, quality plHangZhou, key manufacturing processes and final quality control in house.
We are mastering key competence to supply quality mechanical parts and assembly to our customers for both Chinese and Export Market .

To satisfy different mechanical and functional requirements from our customers we are making a big range of metal products for our clients on base of different blanks solutions and technologies.
These blanks solutions and technologies include processes of Iron Casting, Steel Casting, Stainless Steel Casting, Aluminum Casting and Forging. 

During the early involvement of the customer’s design process, we are giving professional input to our customers in terms of process feasibility, cost reduction and function approach.

                You are welcome to contact us for technical enquiry and business cooperation.

FAQ:
1. Are you a manufacturer or a trading company?
We are a professional manufacturer with over 15 years’ export experience for designing and producing vehicle machinery parts.

2. How can I get some samples?
If you need, we are glad to offer you samples for free, but the new clients are expected to pay the courier cost,
and the charge will be deducted from the payment for formal order.

3. Can you make casting according to our drawing?
Yes, we can make casting according to your drawing, 2D drawing, or 3D cad model. If the 3D cad model can be supplied,
the development of the tooling can be more efficient. But without 3D, based on 2D drawing we can still make the samples properly approved.

4. Can you make casting based on our samples?
Yes, we can make measurement based on your samples to make drawings for tooling making.

5. What’s your quality control device in house?
We have spectrometer in house to monitor the chemical property, tensile test machine to control the mechanical property and UT Sonic as NDT checking method to control the casting detect under the surface of casting.

Casting Method: Sand Casting
Casting Form Material: Ggg50, Option Ggg60, ASTM80-55-06
Casting Metal: Cast Iron
Casting Form Usage Count: Permanent
Surface Treatment: Dacromat Coating, Finish Painting
Surface Roughness: Ra25-100
Samples:
US$ 1.46/kg
1 kg(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

How to Choose the Right Gearbox for Your Machinery

Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:

  1. Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
  2. Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
  3. Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
  4. Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
  5. Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
  6. Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
  7. Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
  8. Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
  9. Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
  10. Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
  11. Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.

Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.

China OEM Custom Precision Iron Casting for Gearbox Housing   synchromesh gearbox	China OEM Custom Precision Iron Casting for Gearbox Housing   synchromesh gearbox
editor by CX 2023-11-20

China OEM High Power Industrial Parallel Shaft Gear Box Reducer Electric Motor Reduction Gearbox components of gearbox

Product Description

Why Choose Us

Product Details

 

Type

Worm Gear Speed Reducer/ gearbox

Model

WMRV 25/30/40/50/63/75/90/110/130/150/185

Ratio

7.5,10,15,20,25,30,40,50,60,80,100.

Color

Blue(RAL5571)/Silver grey (K9149) Or On Customer Request

Material

Housing: Aluminum alloy(size 25~90) / Cast iron(size 110~185)

Worm wheel: Aluminum Bronze or Tin Bronze

Worm shaft: 20CrMn Ti  

Output Shaft: steel-45#

 

Packing

Carton, Honey Comb Carton, Wooden Case with wooden pallet
Warranty 1 Year
Input Power 0.09kw,0.18kw,1.1KW,1.5KW,2.2KW,3KW,4KW,5.5KW,7.5KW,11Kw and so on.
Usages Industrial Machine: Food Stuff, Ceramics, CHEMICAL, Packing, Dyeing,Wood working, Glass.
IEC Flange IEC standard flange or on customer request
Lubricant Synthetic oil or worm gear oil

 

Company Profile

Exhibition

Customized Service

Certificate&Honor

Customer Comments

FAQ

1. How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.

2. What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor information etc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.

3. What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.

4. Do you sell motors?
We have stable motor suppliers who have been cooperating with us for a long-time. They can provide motors
with high quality.

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Worm
Step: Double-Step
Samples:
US$ 25/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Is it Better to Repair or Replace a Damaged Gearbox?

Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:

  • Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
  • Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
  • Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
  • Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
  • Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
  • Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
  • Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.

Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.

China OEM High Power Industrial Parallel Shaft Gear Box Reducer Electric Motor Reduction Gearbox   components of gearbox	China OEM High Power Industrial Parallel Shaft Gear Box Reducer Electric Motor Reduction Gearbox   components of gearbox
editor by CX 2023-11-15

China OEM Ex120 Ex120-2 Ex120-3 Ex120-5 Zx120-2 Zx120-3 Zx120-5 Travel Gearbox for Ex Zx Excavator Travel Reducer sequential gearbox

Product Description

Excavator Final Drive Travel Motor Travel Reduction Gearbox Assy

Factory Supplying Directly
Super Quality with Competitive Price!!!

Product Features:

Product Name: PC200 PC200-1 PC200-3 PC200-5 Final Drive PC200-6 PC200-7 PC200-8 PC210 PC220 E312 E320 E330 F80 F100 F130 F180 F220 F360 F420 F440 Zx00 Zx200-1 Zx200-2 Zx200-3 Zx200-5 ZAX200 ZAX230 EX200 EX220 EX270 EX300 EX400 Excavator Final Drive Travel Motor Assy Travel Gearbox For Sany/Doosan/Daewoo/Hyundai/Kobelco/Hitachi/Yuchai/Liugong/Kato etc
Material: Steel
Colors: Black, Yellow, Red, Blue, Gray etc
Condition: 100% New
Warranty: 6-12 Months
Package: Wooden Case
Related Products: Swing Motor,Swing Gearbox for Excavators 

For more than thousands types of final drive in stock!
Shipment immediately once order confirmed.

Confirming Dimensions With Us Before Ordering
Make Sure the Parts Matching with Your Machine

Strict Quality Control System

Original Factory, Quality Guarantted.
Choose us. You can buy better parts with good price!

 

Related Models:

THE MODELS FOR EXCAVATOR
FOR HITACHI 
EX40-1 EX40-2 EX55 EX60 EX60-2 EX60-3 EX60-5 EX70 EX75
EX100 EX110 EX120 EX120-1 EX120-2 EX120-3 EX120-5 EX130-1 EX200-1
EX200-2 EX200-3 EX200-5 EX220-3 EX220-5 EX270 EX300 EX300-1 EX300-2
EX300-3 EX300-5 EX300A EX330 EX370 EX400-1 EX400-2 EX400-3 EX400-5
EX450 ZAX30 ZAX55 ZAX200 ZAX200-2 ZAX330 ZAX450-1 ZAX450-3 ZAX450-5
ZX110 ZX120 ZX200 ZX200-1 ZX200-3 ZX200-5G ZX200LC-3 ZX210 ZX210-3
ZX210-5 ZX225 ZX240 ZX250 ZX270 ZX300 ZX330 ZX330C ZX350
ZX450 ZX450LC ZX500 ZX500LC ZX520 ZX670 ZX690 ZX870 ZX130
ZX170 ZX170LC ZX195 ZX260 ZX360 ZX360LC ZX400 ZX470 ZX490
FOR KOMATSU
PC20-7 PC30 PC30-3 PC30-5 PC30-6 PC40-7 PC45 PC45-2 PC55
PC120-6 PC130 PC130-7 PC200 PC200-1 PC200-3 PC200-5 PC200-6 PC200-7
PC200-8 PC210-6 PC220-1 PC220-3 PC220-6 PC220-7 PC220-8 PC270-7 PC202B
PC220LC-6 PC220LC-8 PC240 PC300 PC300-3 PC300-5 PC300-6 PC300-7 PC300-7K
PC300LC-7 PC350-6/7 PC400 PC400-3 PC400-5 PC400-6 PC400LC-7 PC450-6 PC450-7
PC600 PC650 PC750 PC800 PC1100 PC1250 PC2000 PC360 PC460
FOR CATERPILLAR
E200B E200-5 E320D E215 E320DL E324D E324DL E329DL E300L
E320S E320 E320DL E240 E120-1 E311 E312B E320BL E345
E324 E140 E300B E330C E120 E70 E322C E322B E325
E325L E330 E450 CAT225 CAT312B CAT315 CAT320 CAT320C CAT320BL
CAT330 CAT322 CAT245 CAT325 CAT320L CAT973  CAT939C CAT963C CAT313
CAT323 CAT318 CAT326 CAT328 CAT329 CAT336 CAT340 CAT345 CAT349
FOR KOBELCO
SK120-6 SK120-5 SK210-8 SK210LC-8 SK220 SK220-1 SK220-3 SK220-5/6 SK200 
SK200 SK200  SK200-3 SK200-6 SK200-8 SK200-5/6 SK60 SK290 SK100
SK230 SK250 SK250-8 SK260LC-8 SK300 SK300-2 SK300-4 SK310 SK320
SK330-8 SK330 SK350LC-8 SK235SR SK450 SK480 SK30-6    
FOR SUMITOMO
SH120  SH120-3 SH200 SH210-5 SH200 SH220-3 SH220-5/7 SH290-3 SH350-5/7
SH220 SH280 SH290-7 SH260 SH300 SH300-3 SH300-5 SH350 SH60
FOR VOLVO
EC160C EC160D EC180B EC180C EC180D EC210 EC210 EC210B EC240B
EC290 EC290B EC240 EC55 EC360 EC360B EC380D EC460 EC460B
EC460C EC700 EC140 EC140B EC160B EC350 EC350DL EC480 EC340
FOR LIEBHERR
R914 R924 R934 R944 R916 R926 R936 R954 R966
R974 R984              
FOR KUBOTA
JH60-7 JH115 JH135 JH161 JH185        
FOR DAEWOO
DH200 DH220-3 DH220 DH220S DH280-2 DH280-3 DH55 DH258 DH130
DH370 DH80 DH500 DH450 DH225 DH150 DH330 DH400 DH580
FOR HYUNDAI
R60-5 R60-7 R80-7 R200 R200-3 R210 R210-1 R210-9 R210LC
R210LC-7 R225 R225-3 R225-7 R250 R250-7 R290 R290LC R290LC-7
R320 R360 R954 R205 R210-5 R215 R230 R235 R275
R300 R385 R485            
FOR KATO
HD512 HD1430 HD512III HD820III HD820R HD1430III HD700VI HD1250VII HD250SE
HD400SE HD500SE HD1880            
FOR DOOSAN
DX225 DX225LC DX258 DX300 DX300LCA DX420 DX430 DX140 DX150
DX220 DX250 DX255 DX260 DX370 DX480 DX520    
FOR SHXIHU (WEST LAKE) DIS.I
SD13-2 DH16J2XL DH16J2LGP SD16 SD22 SD32      
FOR CASE
CX210 CX210B CX210C CX210D CX210LC CX225 CX235 CX235C CX240
CX240C CX245 CX250 CX250C CX300 CX300C CX330 CX330C CX350
CX350C CX460 CX460LC CX470 CX470C CX490 CX490D CX700 CX700B
CX750 CX750D              
FOR JCB
JS200 JS200SC JS210 JS210SC JS220 JS220LC JS230 JS230LC JS240
JS240LC JS290 JS290LC JS300 JS300LC JS330 JS330LC    
FOR XCMG
XE55DA XE60DA XE65DA XE75DA XE80C XE80D XE85C XE85D XE135D
XE155DK XE150D XE155D XE200DA XE200D XE200C XE205DA XE215DA XE215C
XE215D XE215HB XE225DK XE230C XE245DK XE240D XE260C XE265C XE270DK
XE305D XE335DK XE335C XE370D XE370DK XE370CA XE370C XE380DK XE470D
XE490DK XE490CK XE500HB XE520DK XE550DK XE750D XE750G XE950D XE950G
XE950DA XE55 XE60 XE65 XE75 XE80 XE85 XE135 XE150
XE155 XE200 XE205 XE215 XE225 XD230 XE240 XE245 XE260
XE265 XE270 XE305 XE335 XE370 XE380 XE470 XE490 XE500
XE520 XE550 XE750 XE950          
FOR MITSUBISHI
MS30 MS110 MS110-3 MS110-5 MS110-8 MS180      
FOR SAMSUNG
SE210 SE280 SE320            
FOR IHI
IHI35 IHI50 IHI55 IHI60 IHI75        
FOR YMMA
YM15 YM30 YM35 YM55 YM65 YM85      
FOR LIUGONG
LG906C LG907 LG200 LG220 LG925 LG934      

Packing&Shipping

FAQ

 

1. You are a trader or a manufacture?
We are an industry and trade integration business.

2. How can I be sure the part will fit my excavator?
Give us correct model number/machine serial number/ any numbers on the parts itself. 
Or measure the parts give us dimension or drawing.

3. How about the payment terms?
We usually accept T/T(Wire Transfer). other terms also could be negotiated.

4. What is your minimum order?
It depends on what you are buying. Normally, 1 pcs also can be suppllied.

5. What is your delivery time?
FOB HangZhou or any Chinese port : 20 days . If there are any parts in stock , our delivery time is only 1-5 days.

6. What about Quality Control?
We have a perfect QC system for the perfect products. A team who will detect the product quality and specification piece carefully, monitoring every production process until packing is complete, to ensure product safety into container.

Contact Us:

Freda Wang
—————-
Sales Manager

ZheJiang XIHU (WEST LAKE) DIS.N MACHINERY CO., LTD.
Add: Lingong Road, HangZhou City, ZheJiang Province, China
Mob: 15065929360

 

After-sales Service: Technical Support
Warranty: 1 Year
Type: Excavator Parts
Application: Final Drive
Certification: CE, ISO9001: 2000
Condition: New
Samples:
US$ 499/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Common Problems with Gearboxes and How to Troubleshoot Them

Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:

  1. Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
  2. Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
  3. Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
  4. Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
  5. Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
  6. Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
  7. Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
  8. Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
  9. Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
  10. Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.

Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.

China OEM Ex120 Ex120-2 Ex120-3 Ex120-5 Zx120-2 Zx120-3 Zx120-5 Travel Gearbox for Ex Zx Excavator Travel Reducer   sequential gearbox	China OEM Ex120 Ex120-2 Ex120-3 Ex120-5 Zx120-2 Zx120-3 Zx120-5 Travel Gearbox for Ex Zx Excavator Travel Reducer   sequential gearbox
editor by CX 2023-11-14

China OEM CZPT 760u CZPT 765UV Gearbox on The Zimmatc Center CZPT components of gearbox

Product Description

UMC is the industry leader in gearbox technology. Over our 40 year history we have introduced many industry changing gearboxes such as the patented TNT gearbox, the 740, the 760, the 775 and more. We continue to define and redefine industry standards for gearbox performance, quality, features and technology. Our gearboxes are purpose built to do the job. Never over-engineered.

UMC stands behind its products and is committed to manufacturing the best products for a global market.

740-U 50:1 Ratio

Designed for longer spans, larger wheels, and heavier towers.
 

Features and Benefits

  • 2.25 inch output shaft
  • 50:1 gear ratio
  • Cartridge input and output seals
  • Larger input bearings
  • Input shaft guard
  • External seal protectors for input and output seals
  • Top oil fill plug
  • Universal mounting pattern
  • Full cycle expansion chamber with stainless steel cover
  • Filled with extreme pressure worm gear oil
  • Steel output shaft and input shaft
  • Tapered roller bearings
  • Includes carriage bolts and nuts
  • Dual ended input shaft

740-UV 52:1 Ratio
Designed for longer spans, larger wheels and heavier towers where an extended output shaft is required.
 This gearbox has all the same capabilities, features and benefits that the standard 740 has with a few tweaks. The output shaft is extended, the gear ratio is 52:1 and the input shaft is made of ductile iron with a 25° pressure angle allowing this gearbox to be used on center CZPT and lateral move/ linear systems that come standard with these specifications.

Features and Benefits

  • 2.25 inch extended output shaft
  • 52:1 gear ratio with 25° pressure angle
  • Cartridge input and output seals
  • Larger input bearings
  • Input shaft guard
  • External seal protectors for input and output seals
  • Top oil fill plug
  • Universal mounting pattern
  • Full cycle expansion chamber with stainless steel cover
  • Filled with extreme pressure worm gear oil
  • Steel output shaft and ductile iron input shaft
  • Tapered roller bearings
  • Includes carriage bolts and nuts
  • Dual ended input shaft

 

760-UV Gearbox

Designed for corner systems and lateral move carts where an extended output shaft is required

 

Growers typically use UMC’s 760-UV gearbox for the most extreme applications where an extended output shaft is required. The gearbox is designed for higher annual hours of operation while handling the heavy loads experienced on corner systems and lateral move carts as well as the most extreme field conditions where wheel rutting is prominent, soil is heavy, and tower weights are higher.

 

The UMC 760-UV final drive gearbox is our largest and most durable gearbox with an extended output shaft. It features a larger-diameter bull gear than the standard 740 series to handle 20% higher torque. It also features a 2.5″ output shaft to accommodate more overhung load. It is designed for use on center pivots, corners, lateral move/ linear irrigation systems and carts where a 52:1 gear ratio and extended output shaft are standard specifications.

Features and Benefits

  • 2.5″ output shaft
  • 52:1 gear ratio with a 25° pressure angle
  • Unique dual input and output seal design
  • 20% more torque capacity than the standard 740
  • Bronze gear optional
  • Larger input bearings
  • Input shaft guard
  • External seal protectors for input and output seals
  • 11-Bolt mounting pattern
  • Full cycle expansion chamber with aluminum cover
  • Filled with extreme pressure worm gear oil
  • Steel output shaft and ductile iron input shaft
  • Tapered roller bearings
  • Includes carriage bolts and nuts
  • Dual ended input shaft

TNT-2 Gearbox

Designed for applications where the irrigation system may need to be towed

 

This gearbox is the perfect solution for a towable irrigation system. Growers typically prefer this gearbox over a gearbox with a towable hub. Simply disengage the worm and tow your system to its working location, then re-engage the worm and you are ready to run. The CX coupler is the perfect compliment for the TNT-2 gearbox due to the ability to control coupler disengagement at the gearbox.

 

The UMC patented TNT-2 final drive gearbox is designed specifically for applications where a center CZPT or lateral move/ linear irrigation system needs to be towed. The gearbox provides the ability to disengage the worm gear and allows users to move systems from 1 area to another without requiring a Towable Hub add on.

Features and Benefits

  • 2.25″ output shaft
  • 50:1 gear ratio
  • Dual input seals with triple lip output seals
  • Bronze gear optional
  • Input shaft guard
  • External seal protectors for input and output seals
  • Top oil fill plug
  • 11-Bolt mounting pattern
  • Full cycle expansion chamber with stainless steel cover
  • Filled with extreme pressure worm gear oil
  • Steel output shaft and input shaft
  • Tapered roller bearings
  • Includes carriage bolts and nuts
  • Dual ended input shaft

 
 

760-UV Bronze Gearbox

Designed for the most extreme conditions where an extended output shaft is required.

 

Growers typically use The UMC 760-UV bronze gearbox for the most extreme applications where an extended output shaft is required. The gearbox is designed for higher annual hours of operation while handling the heavy loads experienced on corner systems and lateral move carts as well as the most extreme field conditions where wheel rutting is prominent, soil is heavy, and tower weights are higher.

 

The UMC 760-UV Bronze final drive gearbox is our largest and most durable gearbox with an extended output shaft designed for the most extreme growing conditions. It features a high strength aluminum bronze bull gear and a heat treated steel worm gear giving it a much higher load capacity than the standard 760-UV. Additionally, this gear combination greatly reduces gear wear, extending the useful life of the gearbox. It also features a 2.5″ output shaft to accommodate more overhung load. It is designed for use on center pivots, corners, lateral move/ linear irrigation systems and carts where a 52:1 gear ratio and extended output shaft are standard specifications.

Features and Benefits

  • 2.5″ output shaft
  • 52:1 gear ratio with a 25° pressure angle
  • Unique dual input and output seal design
  • Bronze Gear
  • Heat Treated Steel Worm Gear
  • Larger input bearings
  • Input shaft guard
  • External seal protectors for input and output seals
  • 11-Bolt mounting pattern
  • Full cycle expansion chamber with aluminum cover
  • Filled with extreme pressure worm gear oil
  • Steel output shaft
  • Tapered roller bearings
  • Includes carriage bolts and nuts
  • Dual ended input shaft
  • Also Available Assembled in the USA

UMC is the industry leader in gearbox technology. Over 37 year history they have introduced many industry changing gearboxes such as the patented TNT gearbox, the 740, the 760, the 775 and more. CZPT continue to define and redefine industry standards for gearbox performance, quality, features and technology. CZPT gearboxes are purpose built to do the job. Never over-engineered.UMC stands behind its products and is committed to manufacturing the best products for a global market.

 

Application: Motor, Agricultural Machinery, Agricultural
Function: Speed Reduction
Hardness: Hardened
Type: Worm and Wormwheel
Manufacturing Method: Cast Gear
Changes Way: Mixed
Customization:
Available

|

Customized Request

gearbox

Key Market Insights Related to Worm Reduction Gearboxes

A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.

Backlash measurement

Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.

Worm reduction gearboxes

Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
gearbox

Worm reduction gearboxes with closed bladders

The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.

Shaft arrangement of a gearbox

The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
gearbox

Mounting of a gearbox

In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.

China OEM CZPT 760u CZPT 765UV Gearbox on The Zimmatc Center CZPT   components of gearbox	China OEM CZPT 760u CZPT 765UV Gearbox on The Zimmatc Center CZPT   components of gearbox
editor by CX 2023-07-12

China OEM Spiral Bevel Helical Speed Gear Reducer Reduction Agriculture Nmrv Worm Winch Track Slewing Drive Agricultural Cycloidal Servo High Precision Planetary Gearbox with Great quality

Product Description

Spiral Bevel Helical Speed Gear Reducer Reduction Agriculture Nmrv Worm Winch Track Slewing Drive Agricultural Cycloidal Servo High Precision Planetary Gearbox

 

Company Profile

We are a professional company engaged in the R&D, design, and manufacturing of gearboxes. The company has introduced a number of sophisticated production and testing equipment. We have successfully developed 800Nm-11200Nm planetary gearboxes for construction machinery, special planetary gearboxes for mixers, special planetary gearboxes for buildings, special reducers for mines, wind power reducers, hydraulic rotary, winch series, gearboxes for rolling mills, and other series of gearboxes with hundreds of thousands of specifications. The products have been widely used in building materials, metallurgy, engineering machinery, hoisting, shipping, chemical, pharmaceutical, electric power, and other supporting units and engineering projects.
Since its establishment, the company has been accelerating the pace of scientific and technological innovation and independent brand construction to build its core competitiveness with new thinking and new manufacturing awareness.

Our Equipments

Certification

Packaging and Shipment 

Product Description

Agricultural gearbox:
Flail mower gearbox, rotary tiller gearbox, lawn mower gearbox, rotary cutter gearbox, agricultural sprayer gearbox, post hole digger gearbox, feed mixer gearbox, rotary mower gearbox, gearbox for circular saws, irrigation reels gearbox, agricultural generator gearbox, fertilizer spreader gearbox, hydraulic drive gearbox, manure spreader gearbox, rotary rakes gearbox, hay tedders gearbox, micro tiller gearbox, cutter bars gearbox, fertilizer mixer gearbox, agitators gearbox for sewage, round baler gearbox, snowblower gearbox

Planetary gearbox:

–Gear speed reducer for tracked vehicle
–Gear speed reducer for winch
–Planetary gear reducer for wheeled vehicle
–Planetary slewing drive
–Planetary gear reducer for wind turbines
–Inline planetary gear reducer
–Right angle gear drive
–Planetary gearbox feed mixer drive

Industrial gearbox
Worm gearbox: RV series, WP series, SWL series screw jack, VF series 

Helical gearbox: R/F/K/S series, HB series, BKM series, RC series, SMR shaft mounted gearbox, TA shaft mounted gearbox

Cycloidal gearboxes: BL/XL flange vertical installed double shaft type, BW/XW baseboard horizontal installed double shaft type, BLD/XLD flange vertical installed motor direct-connection type, BWD/XWD baseboard horizontal installed motor direct-connection type
High precision planetary gearbox

 

 

Application

 

Agriculture & Forestry Industry & Mining Food Processing
  • Sprayer
  • Wheel Harvester
  • Crawler Harvester
  • Feed Mixer
  • Forestry Machinery

 

  • Earthwork
  • Construction
  • Concrete
  • Road Construction
  • Crushing, Grinding, & Raw Material Processing
  • Mud Treatment
  • Grain, processing & milling
  • Baking processing
  • Fruit, vegetable & beverage processing

 

Transport Maritime Affairs Wind Energy
  • Road vehicles
  • Warehouse and raw material handling
  • Off-highway vehicles
  • Access and aerial platform
  • Warehouse and raw material handling
  • Automatic storage
  • Airport equipment
  • Logistics and industrial cranes
  • Mobile crane
  • Dredging vessel
  • Offshore construction vessel
  • Work vessels and tugs
  • Offshore platform
  • Merchant ship
  • Pipe laying machine and cable laying machine

 

 

 

  • Wind turbine
  • yaw
  • pitch

 

 

The installation and dimensions of the planetary gearbox are designed in strict accordance with the requirements of Italian and American manufacturers so that they can be interchanged with the following series of planetary gearboxes. Performance and connection dimensions. They are ideal substitutes for these brands.

trasmital bonfiglioli, revini riduttori, rexroth, CZPT riduttori, rossi, zollern 

 

 

Related Products–Transmission parts

Drive shafts

 

 

For more reducers and mechanical accessories, please click here to view

 

 

 

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Stepless

gearbox

Choosing a Gearbox For Your Application

The gearbox is an essential part of bicycles. It is used for several purposes, including speed and force. A gearbox is used to achieve one or both of these goals, but there is always a trade-off. Increasing speed increases wheel speed and forces on the wheels. Similarly, increasing pedal force increases the force on the wheels. This makes it easier for cyclists to accelerate their bicycles. However, this compromise makes the gearbox less efficient than an ideal one.

Dimensions

Gearboxes come in different sizes, so the size of your unit depends on the number of stages. Using a chart to determine how many stages are required will help you determine the dimensions of your unit. The ratios of individual stages are normally greater at the top and get smaller as you get closer to the last reduction. This information is important when choosing the right gearbox for your application. However, the dimensions of your gearbox do not have to be exact. Some manufacturers have guides that outline the required dimensions.
The service factor of a gearbox is a combination of the required reliability, the actual service condition, and the load that the gearbox will endure. It can range from 1.0 to 1.4. If the service factor of a gearbox is 1.0, it means that the unit has just enough capacity to meet your needs, but any extra requirements could cause the unit to fail or overheat. However, service factors of 1.4 are generally sufficient for most industrial applications, since they indicate that a gearbox can withstand 1.4 times its application requirement.
Different sizes also have different shapes. Some types are concentric, while others are parallel or at a right angle. The fourth type of gearbox is called shaft mount and is used when mounting the gearbox by foot is impossible. We will discuss the different mounting positions later. In the meantime, keep these dimensions in mind when choosing a gearbox for your application. If you have space constraints, a concentric gearbox is usually your best option.

Construction

The design and construction of a gearbox entails the integration of various components into a single structure. The components of a gearbox must have sufficient rigidity and adequate vibration damping properties. The design guidelines note the approximate values for the components and recommend the production method. Empirical formulas were used to determine the dimensions of the various components. It was found that these methods can simplify the design process. These methods are also used to calculate the angular and axial displacements of the components of the gearbox.
In this project, we used a 3D modeling software called SOLIDWORKS to create a 3-D model of a gear reducer. We used this software to simulate the structure of the gearbox, and it has powerful design automation tools. Although the gear reducer and housing are separate parts, we model them as a single body. To save time, we also removed the auxiliary elements, such as oil inlets and oil level indicators, from the 3D model.
Our method is based on parameter-optimized deep neural networks (DBNs). This model has both supervised and unsupervised learning capabilities, allowing it to be self-adaptive. This method is superior to traditional methods, which have poor self-adaptive feature extraction and shallow network generalization. Our algorithm is able to recognize faults in different states of the gearbox using its vibration signal. We have tested our model on two gearboxes.
With the help of advanced material science technologies, we can now manufacture the housing for the gearbox using high-quality steel and aluminium alloys. In addition, advanced telematics systems have increased the response time of manufacturers. These technologies are expected to create tremendous opportunities in the coming years and fuel the growth of the gearbox housing market. There are many different ways to construct a gearbox, and these techniques are highly customizable. In this study, we will consider the design and construction of various gearbox types, as well as their components.
gearbox

Working

A gearbox is a mechanical device that transmits power from one gear to another. The different types of gears are called planetary gears and are used in a variety of applications. Depending on the type of gearbox, it may be concentric, parallel, or at a right angle. The fourth type of gearbox is a shaft mount. The shaft mount type is used in applications that cannot be mounted by foot. The various mounting positions will be discussed later.
Many design guidelines recommend a service factor of 1.0, which needs to be adjusted based on actual service conditions. This factor is the combined measure of external load, required reliability, and overall gearbox life. In general, published service factors are the minimum requirements for a particular application, but a higher value is necessary for severe loading. This calculation is also recommended for high-speed gearboxes. However, the service factor should not be a sole determining factor in the selection process.
The second gear of a pair of gears has more teeth than the first gear. It also turns slower, but with greater torque. The second gear always turns in the opposite direction. The animation demonstrates this change in direction. A gearbox can also have more than one pair of gears, and a first gear may be used for the reverse. When a gear is shifted from one position to another, the second gear is engaged and the first gear is engaged again.
Another term used to describe a gearbox is “gear box.” This term is an interchangeable term for different mechanical units containing gears. Gearboxes are commonly used to alter speed and torque in various applications. Hence, understanding the gearbox and its parts is essential to maintaining your car’s performance. If you want to extend the life of your vehicle, be sure to check the gearbox’s efficiency. The better its functioning, the less likely it is to fail.

Advantages

Automatic transmission boxes are almost identical to mechanical transmission boxes, but they also have an electronic component that determines the comfort of the driver. Automatic transmission boxes use special blocks to manage shifts effectively and take into account information from other systems, as well as the driver’s input. This ensures accuracy and positioning. The following are a few gearbox advantages:
A gearbox creates a small amount of drag when pedaling, but this drag is offset by the increased effort to climb. The external derailleur system is more efficient when adjusted for friction, but it does not create as little drag in dry conditions. The internal gearbox allows engineers to tune the shifting system to minimize braking issues, pedal kickback, and chain growth. As a result, an internal gearbox is a great choice for bikes with high-performance components.
Helical gearboxes offer some advantages, including a low noise level and lower vibration. They are also highly durable and reliable. They can be extended in modular fashion, which makes them more expensive. Gearboxes are best for applications involving heavy loads. Alternatively, you can opt for a gearbox with multiple teeth. A helical gearbox is more durable and robust, but it is also more expensive. However, the benefits far outweigh the disadvantages.
A gearbox with a manual transmission is often more energy-efficient than one with an automatic transmission. Moreover, these cars typically have lower fuel consumption and higher emissions than their automatic counterparts. In addition, the driver does not have to worry about the brakes wearing out quickly. Another advantage of a manual transmission is its affordability. A manual transmission is often available at a lower cost than its automatic counterpart, and repairs and interventions are easier and less costly. And if you have a mechanical problem with the gearbox, you can control the fuel consumption of your vehicle with appropriate driving habits.
gearbox

Application

While choosing a gearbox for a specific application, the customer should consider the load on the output shaft. High impact loads will wear out gear teeth and shaft bearings, requiring higher service factors. Other factors to consider are the size and style of the output shaft and the environment. Detailed information on these factors will help the customer choose the best gearbox. Several sizing programs are available to determine the most appropriate gearbox for a specific application.
The sizing of a gearbox depends on its input speed, torque, and the motor shaft diameter. The input speed must not exceed the required gearbox’s rating, as high speeds can cause premature seal wear. A low-backlash gearbox may be sufficient for a particular application. Using an output mechanism of the correct size may help increase the input speed. However, this is not recommended for all applications. To choose the right gearbox, check the manufacturer’s warranty and contact customer service representatives.
Different gearboxes have different strengths and weaknesses. A standard gearbox should be durable and flexible, but it must also be able to transfer torque efficiently. There are various types of gears, including open gearing, helical gears, and spur gears. Some of the types of gears can be used to power large industrial machines. For example, the most popular type of gearbox is the planetary drive gearbox. These are used in material handling equipment, conveyor systems, power plants, plastics, and mining. Gearboxes can be used for high-speed applications, such as conveyors, crushers, and moving monorail systems.
Service factors determine the life of a gearbox. Often, manufacturers recommend a service factor of 1.0. However, the actual value may be higher or lower than that. It is often useful to consider the service factor when choosing a gearbox for a particular application. A service factor of 1.4 means that the gearbox can handle 1.4 times the load required. For example, a 1,000-inch-pound gearbox would need a 1,400-inch-pound gearbox. Service factors can be adjusted to suit different applications and conditions.

China OEM Spiral Bevel Helical Speed Gear Reducer Reduction Agriculture Nmrv Worm Winch Track Slewing Drive Agricultural Cycloidal Servo High Precision Planetary Gearbox   with Great quality China OEM Spiral Bevel Helical Speed Gear Reducer Reduction Agriculture Nmrv Worm Winch Track Slewing Drive Agricultural Cycloidal Servo High Precision Planetary Gearbox   with Great quality
editor by CX 2023-07-11

China OEM Double Shaft Zpt70 Two Stage Gearbox with Hot selling

Product Description

Relate recommend ?
Planetary gearbox : size 242 and custom size  within 1 stage, 2 stage, 3 stage.
Ac servo motor :Delta, Yasakawa,Panasonic, Mistubishi and economic type
PLC: CZPT semensis Mistubishi and etc
Linear Components: HIWIN, TBI, PMI, ABBA, THK, CPC , and economic type.

Double Shaft ZPT70 Two Stage Gearbox

-Planetary gearbox is a widely used industrial product, which can reduce the speed of motor and increase the output torque. Planetary reducer can be used as supporting parts in lifting, excavation, transportation, construction and other industries.

-Stage Ratio :32,40,50,56,70,80,100,140
-Product picture

-Datasheet

-Company introduction
FOCUS is an automation & drive focused global company, providing global customers with control, display, drive and system solutions & other related products and services, under the support of its excellent electrical and electronic technology as well as strong control technical force.
 
We provide and develop perfect products and solutions according to different requirement of the industry. Our products have been used and applied successfully in packing, printing, textiles, plastic injection, elevator, machine tool, robot,wood cutting, stone carving, ceramic, glass, paper making industry, crane, fan & pump, new energy resources etc.

FOCUS, your professional electrical partner !

-Payment & Package & Delivery 
1,Payment
( T/T , Western union, Paypal , L/C and so on )
2,Pakcage
( Small gearbox use carton package, Big gearbox use wooden box package ) 
3,Delivery
( By International Express,  By Air , By Sea )

 

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Double-Step
Customization:
Available

|

Customized Request

gearbox

How to Select a Gearbox

When you drive your vehicle, the gearbox provides you with traction and speed. The lower gear provides the most traction, while the higher gear has the most speed. Selecting the right gear for your driving conditions will help you maximize both. The right gearing will vary based on road conditions, load, and speed. Short gearing will accelerate you more quickly, while tall gearing will increase top speed. However, you should understand how to use the gearbox before driving.

Function

The function of the gearbox is to transmit rotational energy to the machine’s drive train. The ratio between input and output torque is the ratio of the torque to the speed of rotation. Gearboxes have many different functions. A gearbox may have multiple functions or one function that is used to drive several other machines. If one gear is not turning, the other will be able to turn the gearbox. This is where the gearbox gets its name.
The pitch-controlled system has an equal number of failure modes as the electrical system, accounting for a large proportion of the longest machine downtime and halt time. The relationship between mechanisms and faults is not easily modeled mathematically. Failure modes of gearboxes are shown in Fig. 3. A gearbox’s true service life is six to eight years. However, a gearbox’s fault detection process must be developed as mature technology is required to reduce the downtime and avoid catastrophic incidents.
A gearbox is a vital piece of machinery. It processes energy produced by an engine to move the machine’s parts. A gearbox’s efficiency depends on how efficiently it transfers energy. The higher the ratio, the more torque is transferred to the wheels. It is a common component of bicycles, cars, and a variety of other devices. Its four major functions include:
In addition to ensuring gearbox reliability, a gearbox’s maintainability should be evaluated in the design phase. Maintainability considerations should be integrated into the gearbox design, such as the type of spare parts available. An appropriate maintenance regime will also determine how often to replace or repair specific parts. A proper maintenance procedure will also ensure that the gearbox is accessible. Whether it is easy to access or difficult to reach, accessibility is essential.

Purpose

A car’s transmission connects the engine to the wheels, allowing a higher-speed crankshaft to provide leverage. High-torque engines are necessary for the vehicle’s starting, acceleration, and meeting road resistance. The gearbox reduces the engine’s speed and provides torque variations at the wheels. The transmission also provides reversing power, making it possible to move the vehicle backwards and forwards.
Gears transmit power from one shaft to another. The size of the gears and number of teeth determine the amount of torque the unit can transmit. A higher gear ratio means more torque, but slower speed. The gearbox’s lever moves the engaging part on the shaft. The lever also slides the gears and synchronizers into place. If the lever slips to the left or right, the engine operates in second gear.
Gearboxes need to be closely monitored to reduce the likelihood of premature failure. Various tests are available to detect defective gear teeth and increase machine reliability. Figure 1.11(a) and (b) show a gearbox with 18 teeth and a 1.5:1 transmission ratio. The input shaft is connected to a sheave and drives a “V” belt. This transmission ratio allows the gearbox to reduce the speed of the motor, while increasing torque and reducing output speed.
When it comes to speed reduction, gear box is the most common method for reducing motor torque. The torque output is directly proportional to the volume of the motor. A small gearbox, for example, can produce as much torque as a large motor with the same output speed. The same holds true for the reverse. There are hybrid drives and in-line gearboxes. Regardless of the type, knowing about the functions of a gearbox will make it easier to choose the right one for your specific application.
gearbox

Application

When selecting a gearbox, the service factor must be considered. Service factor is the difference between the actual capacity of the gearbox and the value required by the application. Additional requirements for the gearbox may result in premature seal wear or overheating. The service factor should be as low as possible, as it could be the difference between the lifetime of the gearbox and its failure. In some cases, a gearbox’s service factor can be as high as 1.4, which is sufficient for most industrial applications.
China dominates the renewable energy industry, with the largest installed capacity of 1000 gigawatts and more than 2000 terawatt hours of electricity generated each year. The growth in these sectors is expected to increase the demand for gearboxes. For example, in China, wind and hydropower energy production are the major components of wind and solar power plants. The increased installation capacity indicates increased use of gearboxes for these industries. A gearbox that is not suitable for its application will not be functional, which may be detrimental to the production of products in the country.
A gearbox can be mounted in one of four different positions. The first three positions are concentric, parallel, or right angle, and the fourth position is shaft mount. A shaft mount gearbox is typically used in applications where the motor can’t be mounted via a foot. These positions are discussed in more detail below. Choosing the correct gearbox is essential in your business, but remember that a well-designed gearbox will help your bottom line.
The service factor of a gearbox is dependent on the type of load. A high shock load, for example, can cause premature failure of the gear teeth or shaft bearings. In such cases, a higher service factor is required. In other cases, a gearbox that is designed for high shock loads can withstand such loads without deteriorating its performance. Moreover, it will also reduce the cost of maintaining the gearbox over time.

Material

When choosing the material for your gearbox, you must balance the strength, durability, and cost of the design. This article will discuss the different types of materials and their respective applications and power transmission calculations. A variety of alloys are available, each of which offers its own advantages, including improved hardness and wear resistance. The following are some of the common alloys used in gears. The advantage of alloys is their competitive pricing. A gear made from one of these materials is usually stronger than its counterparts.
The carbon content of SPCC prevents the material from hardening like SS. However, thin sheets made from SPCC are often used for gears with lower strength. Because of the low carbon content, SPCC’s surface doesn’t harden as quickly as SS gears do, so soft nitriding is needed to provide hardness. However, if you want a gear that won’t rust, then you should consider SS or FCD.
In addition to cars, gearboxes are also used in the aerospace industry. They are used in space travel and are used in airplane engines. In agriculture, they are used in irrigation, pest and insect control machinery, and plowing machines. They are also used in construction equipment like cranes, bulldozers, and tractors. Gearboxes are also used in the food processing industry, including conveyor systems, kilns, and packaging machinery.
The teeth of the gears in your gearbox are important when it comes to performance. A properly meshing gear will allow the gears to achieve peak performance and withstand torque. Gear teeth are like tiny levers, and effective meshing reduces stress and slippage. A stationary parametric analysis will help you determine the quality of meshing throughout the gearing cycle. This method is often the most accurate way to determine whether your gears are meshing well.
gearbox

Manufacturing

The global gear market is divided into five key regions, namely, North America, Europe, Asia Pacific, and Latin America. Among these regions, Asia Pacific is expected to generate the largest GDP, owing to rapidly growing energy demand and investments in industrial infrastructure. This region is also home to some of the largest manufacturing bases, and its continuous building of new buildings and homes will support the industry’s growth. In terms of application, gearboxes are used in construction, agricultural machinery, and transportation.
The Industrial Gearbox market is anticipated to expand during the next several years, driven by the rapid growth of the construction industry and business advancements. However, there are several challenges that hamper the growth of the industry. These include the high cost of operations and maintenance of gear units. This report covers the market size of industrial gearboxes globally, as well as their manufacturing technologies. It also includes manufacturer data for the period of 2020-2024. The report also features a discussion of market drivers and restraints.
Global health crisis and decreasing seaborne commerce have moderately adverse effects on the industry. Falling seaborne commerce has created a barrier to investment. The value of international crude oil is expected to cross USD 0 by April 2020, putting an end to new assets development and exploitation. In such a scenario, the global gearbox market will face many challenges. However, the opportunities are huge. So, the market for industrial gearboxes is expected to grow by more than 6% by 2020, thanks to the increasing number of light vehicles sold in the country.
The main shaft of a gearbox, also known as the output shaft, spins at different speeds and transfers torque to an automobile. The output shaft is splined so that a coupler and gear can be connected to it. The counter shaft and primary shaft are supported by bearings, which reduce friction in the spinning element. Another important part of a gearbox is the gears, which vary in tooth count. The number of teeth determines how much torque a gear can transfer. In addition, the gears can glide in any position.

China OEM Double Shaft Zpt70 Two Stage Gearbox   with Hot selling		China OEM Double Shaft Zpt70 Two Stage Gearbox   with Hot selling
editor by CX 2023-06-09

China OEM CZPT Truck Transmission Parts Wg9925477132 Steering Gearbox Assembly planetary gearbox

Product Description

WGSteering Gearbox Assembly
Key Words Steering Gearbox Assembly Application Heavy Truck
OE NO. WG9925477132 Truck Model HOWO
Material OEM Standard Warranty 3~6 months
Weight OEM Standard Payment TT/PAYPAL/WU
Size OEM Standard MOQ 1 PC
Place of Origin ZheJiang , China Quality OEM Standard
Condition New Delivery Prompt Delivery


Our Services

1.All of our products are with Professional Service.
2.We can offer all kinds of OEM Spare Parts according to the customer’s  requirements.
3.We can offer Free Consultation of service information .
4.The dominance we kept all along is to provide the customers with Genuine Spare Parts,
5.Standard Export Package to protect the parts from long-distance delivery.
6.Professional sales and after sale service team, Timely and Efficiently to solve your problem.
7.We are willing to privide the High Quality,Reasonable Price and Perfect Service.
8.If you are not satisfied with our products, We can Provide Exchange and Return Service.
9.We will NEVER pass off our  Own factory’s products as Original ones!

 

 

Who we are?

The most professional truck and spare parts manufacturer in China;
The leading truck and spare parts exporter in China;
The most comprehensive truck and spare parts solution provider in China;
The most worry-free and most satisfactory and reputable supplier for you in China.
We can never let you down if you choose us!
 
FAQ

1)What about your packing?
   Generally,our spare parts are packed in anti-rust paper,plastic bag,box,carton or according
to customer’s requirements.

2)What about your terms of payment?
  L/C, T/T, D/P, Western Union, Paypal  Money Gram, Others

3)What is your terms of delivery?
   EXW,FOB,CFR,CIF                              

4)How about your delivery time?
   Usually,it will take around 3~7 days after your advance payment,it depends on the items
and quantities of your order.

5)What is your sample policy?
   We can supply the samples if the samples are in stock,but the customers will pay the sample
cost and the delivery cost(or freight collect)

Key Words: Steering Gearbox Assembly
OE No.: Wg9925477132
Material: OEM Standard
Weight: OEM Standard
Size: OEM Standard
Condition: New
Samples:
US$ 350/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Key Market Insights Related to Worm Reduction Gearboxes

A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.

Backlash measurement

Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.

Worm reduction gearboxes

Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
gearbox

Worm reduction gearboxes with closed bladders

The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.

Shaft arrangement of a gearbox

The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
gearbox

Mounting of a gearbox

In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.

China OEM CZPT Truck Transmission Parts Wg9925477132 Steering Gearbox Assembly   planetary gearbox	China OEM CZPT Truck Transmission Parts Wg9925477132 Steering Gearbox Assembly   planetary gearbox
editor by CX 2023-06-07

China OEM China OEM Large Transmission Parallel Helical Shaft Custom Large Gearbox cycloidal gearbox

Product Description

Product Description

China OEM Large Transmission Parallel Helical Shaft custom large Gearbox

Components:
1. Housing: Cast Iron or Steel Plate Welding
2. Gear Set: Hardened Helical Gear Pairs, Carburizing, Quenching, Grinding, Gear Hardness HRC54-62
3. Input Configurations:
Single or Double Keyed CZPT Shaft Input
4. Output Configurations:
Single or Double Keyed CZPT Shaft Output
5. Main Options:
Backstop
Forced Lubrication Oil Pump
Cooling Fan, Cooling Coils

Detailed Photos

Models:
ZDY Series, ZLY Series, ZSY Series, ZFY Series
Features:
1. Optional welding steel plate gear box
2. High quality alloy steel helical gears, carburizing, quenching, grinding, large load capacity
3. Optimized design, interchangeable spare parts
4. High efficiency, high reliability, long service life, low noise
5. Output shaft rotation direction: clockwise, counterclockwise or bidirectional
6. A variety of shaft configurations: single or double input and output shaft in 1 side or 2 sides
7. Optional backstop and lengthening output shafts

Product Parameters

Parameters:

ZY Series Models Ratio
ZDY (1 Stage) ZDY80, ZDY100, ZDY125, ZDY160, ZDY200, ZDY250, ZDY280, ZDY315, ZDY355, ZDY400, ZDY450, ZDY500, ZDY560 1.25~6.3
ZLY (2 Stage) ZLY112, ZLY125, ZLY140, ZLY160, ZLY180, ZLY200, ZLY224, ZLY250, ZLY280, ZLY315, ZLY355, ZLY400, ZLY450, ZLY500, ZLY560, ZLY630, ZLY710 6.3~20
ZSY (3 Stage) ZSY160, ZSY180, ZSY200, ZSY224, ZSY250, ZSY280, ZSY315, ZSY355, ZSY400, ZSY450, ZSY500, ZSY560, ZSY630, ZSY710 22.4~100
ZFY (4 Stage) ZFY180, ZFY200, ZFY225, ZFY250, ZFY280, ZFY320, ZFY360, ZFY400, ZFY450, ZFY500, ZFY560, ZFY630, ZFY710 100~500

Installation:
Horizontal Mounted
Vertical Mounted
Lubrication:
Oil Dip and Splash Lubrication
Forced Lubrication
Cooling:
Natural Cooling
Auxiliary Cooling Devices (Cooling Fan, Cooling Coils)

Packaging & Shipping

Company Profile

Our Advantages

After Sales Service

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

FAQ

FAQ:

1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

Welcome to contact us for more detail information and inquiry.
If you have specific parameters and requirement for our gearbox, customization is available.

Application: Machinery
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step
Customization:
Available

|

Customized Request

gearbox

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China OEM China OEM Large Transmission Parallel Helical Shaft Custom Large Gearbox   cycloidal gearbox	China OEM China OEM Large Transmission Parallel Helical Shaft Custom Large Gearbox   cycloidal gearbox
editor by CX 2023-06-06

China Professional OEM Die Casting Product Gearbox Front Housing for Transmission Parts sequential gearbox

Product Description

High-precision ground gears High-toothed gears 30~360mm

Product Details

Advantages of CZPT CNC Machining Services

  • Efficient CNC machining factory for mass production rapid prototyping service
  • Average 7 days turnaround time and 99.85% on time delivery
  • Multiple options of machining materials to meet specific properties.
  • Fast free quotation within 24 hours after inquiry
  • High customer satisfaction and loyalty
  • Rich design and manufacturing experience

If you are looking for quality CNC machining services near me, our low cost CNC custom machining will review the design, build your quote, assess the cost and get your non-metal or metal fabrication parts into production orderly and efficiently.

Our Advantages

We have experienced team for CNC machining service, advanced technology, excellent equipment, strict management is the foundation of the company’s continuous development and expansion, and the precision CNC machined products win the trust of customers. We believe that through our continuous efforts and pursuit, we will be able to achieve mutual benefit and CZPT with our customers!

Applications

 

Applications of CZPT CNC Machining Services

CNC machining parts are all around you, they may be important components of your car and also can perform vital functions in your electrical equipment. CZPT is an accomplished CNC supplier that engaged in a broad range of CNC machining applications.

Manufacturing Process Milling, Turning, Grinding, Fast/Midium/Slow Wire EDM, Welding, Metal Plate, Etc.
Material SUS, SPCC/SGCC, copper/brass, aluminum, ABS, plastic, rubber for option (according to customer’s requirements for special material)
Surface Treatment Galvanized (zinc-plated, nickel-plated, chrome-plated, silver-plated),
powder coating/oil painting, polishing (mirror polishing, electrolytic polishing),
brushing, sand blasting, anodizing etc
Tolerance +/-0.01mm or special requirements
Package PE Bag, Paper carton box, plywood case/pallet/crate
Application Auto parts, electronic products, power supply, industry cabinet, construction etc
Quality Control ISO9001
Drawing File Format Solidworks, Pro/E, Auto CAD, PDF
Features
  1. Customized Design
  2. Sample Order Accepted
  3. Short Delivery time
  4. Competitive Prices
  5. Long time quality Insurance
  6. Professional after-sale services
Inspection IQC, PQC, FQC, OQA
Delivery time 10-15days
Quality Insurance One Year

Company Profile

Junying Metal Manufacturing Co., Limited was founded in 2005, with a registered capital of 3 million, and now has more than 100 employees. We are 1 of the China best CNC machining companies, specialize in low cost OEM CNC machining parts manufacturing. The products are mainly used in medical, electronic, aerospace, mechanical, communication, toys, intelligent equipment and other industries.

We have invested a lot quality and production environments. In 2015, We passed the quality system review of SGS Company and got the first “ISO9001:2015” certificate. In 2016, we passed the environment system review of SGS Company. CZPT has carefully implemented each regulation in management details in accordance with ISO, and fully guaranteed the CNC machining product quality and customer satisfaction.

Production Process

How Does CNC Machining Work?

CNC machining process generates a part on a CNC machine from a computer design file. The process will go through:

  • Load the CAD (Computer Aided Design) file into CAM (Computer Aided Manufacturing) software
  • Determine tool paths based on the part geometry
  • CAM software create digital instructions or G-Code tells machine what to do and how to do
  • CNC machines take the execute the operations as the programming language

 

Packaging Details 

Each product packed with plastic preservative, EPE, foam plastic bag, Carton outside, wood case or iron case or as per the customer’s special requirement.

Logistics

We prefer DHL or TNT express or other air freight between 1kg-100kg.
we prefer sea freight more than 100kg or more than 1CBM
As per customized specifications.

 

Payment
 

We accept payment by T/T, PayPal.

FAQ

Q: What do I need for offering a quote?

A: Please offer us 2D or 3D drawings (with material, dimension, tolerance, surface treatment and another technical requirement, etc.), quantity, application, or samples. Then we will quote the best price within 24h.

 

Q: What is your MOQ?
 

A: MOQ depends on our client’s needs, besides, we welcome trial orders before mass production.

 

Q: What is the production cycle?

A: It varies a lot depending on product dimension, technical requirements, and quantity. We always try to meet customers’ requirements by adjusting our workshop schedule.

 

Q: What kind of payment terms do you accept?

A.: T/T,  PayPal.

 

Q: Is it possible to know how is my product going on without visiting your company?

A: We will offer a detailed production schedule and send weekly reports with digital pictures and videos which show the machining progress.

 

Q: If you make poor quality goods, will you refund our fund?

A: We make products according to drawings or samples strictly until they reach your 100% satisfaction. And actually we won’t take a chance to do poor quality products. We are proud of keeping the spirit of good quality.

 

For more questions, please send an inquiry or e-mail or call us! Thanks!

Condition: New
Certification: CE, RoHS, ISO9001
Standard: DIN, ASTM, GOST, JIS, ANSI, BS
Customized: Customized
Material: Aluminum
Application: Metal Recycling Machine, Metal Cutting Machine, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Casting Machinery
Samples:
US$ 3.1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China Professional OEM Die Casting Product Gearbox Front Housing for Transmission Parts   sequential gearbox	China Professional OEM Die Casting Product Gearbox Front Housing for Transmission Parts   sequential gearbox
editor by CX 2023-04-24